nailer pro logo

When using a pneumatic nail gun, it is often difficult to determine which plastic and paper-collated frame nails are best. Because collated nails do not have to meet the same stringent standards for strength and stiffness as concrete nails. Thus, you can skip several steps in the manufacturing process. Carbon steel is used to make most row nails.

Collated nails are nails that were also put together in strips for pneumatic nailers. These strips hold a certain number of nails and easily fit into pneumatic nailers. Machines mostly make paper-collated and plastic-collated nails, but only some air-driven nails are the same. If you’re unsure, you can switch between plastic and paper.

What’s The Difference Between Collated Paper Framing Nails and Plastic Framing Nails?

About 80% of the market for collated nails is made up of paper tape and plastic collated nails, the most common kinds sold in my area. Because of how cheap they are, 55 percent of this market is still made up of plastic collated nails. The cost of plastic collated nails is much less than that of paper. When paper tape nails are used in pneumatic frame nailers, they are less likely to get stuck. Let’s look at how useful each one is.

Paper Collated Framing Nails

Paper-coated nails are the most expensive option, but they perform better in one crucial way. If you use a nail gun, it will push the paper pieces into the wood instead of flying around and possibly hurting you. It doesn’t matter if your paper strip nails are actually put together at an angle. They will still shoot well. In the same way, plastic strips that are stuck together have the same qualities.

The most common angles for paper-collated nails are 30° and 34°, which makes it hard to choose the suitable fastener. But the same gun will work with any strip that is within 4° of the original. In addition to helping people get into the right places. This also means you don’t have to work harder to smooth the area around the nail.

Paper-collated framing nails are the most expensive option, but they work the best. Add insult to injury; paper-collated nails won’t “flag” or leave collation material stuck under a nail head. It is a problem that can lead to an uneven surface and cause the nails not to sit correctly.


  • Fewer flying debris
  • Less risk
  • less grimy
  • Hold more nails per strip
  • constant nail puncturing


  • Non-waterproof paper can ruin collation
  • greater fragility than welded-wire nails
  • the most costly form of collation

Plastic Collated Framing Nails

When making nails, factories often use the lowest-priced plastic they can find. It makes nails that don’t work as well as more expensive ones. Most of the time, these nails are the least costly choice and hold up well. They can handle water, heat, and cold, so you can use them outside. When fired, plastic collates are safer and less likely to get stuck.

Nail strips with plastic coatings are more likely to come apart due to rough treatment on the job. They’re cheap, but they have a catch. You can use them for anything from framing to sheathing walls and roofs to building decks. You can use them for anything from framing to sheathing walls and ceilings to building decks.

The time and effort saved using paper strip collated nails instead of plastic ones more than makes up for their lower initial cost. 

Related Post: DEWALT DW325PL Plastic Collated Framing Nailer


  • Durable in the face of rain
  • extremely long-lasting in a stick form and a reasonable
  • immune to extreme temperatures


  • Flagging-prone
  • expensed than the cost of plastic
  • can get out of shape

Is it Actually Interchangeable?

Framing nailers are different when it comes to the sizes and styles of nails they can drive. Any brand of nails will do, so long as the angle is the same and the length is the same as your nailers.

Nails are commonly used in structural joinings, such as wall framing since they are more resilient than screws under stress. When installing wooden floors, fixing siding or roofing, or attaching plywood sheeting for external walls, nails are inevitably used.

All you need to do is ensure the nails’ degree matches your nailers. And the length stays within the parameters you’ve established for your gun, and you may use nails from any brand. When using a framing gun, choose between 28 and 21 degrees; when using a small nailer or trim gun, select the appropriate degree and know the maximum length the gun can accommodate.


Which, paper or plastic collated nails, performs better?

Nails used for paper collating must be spotless. It can achieve a more substantial grip with pins made from paper collation. Contrary to popular belief, manufacturers don’t remove oil from the nails before packing them in plastic.

Could I use 22-degree nails in a nail gun made for 21-degree nails?

It doesn’t matter. Either 21-degree or 22-degree nails will do the job. With this nailer, the nail angle can be off by up to 3 degrees. So you can use either one.

Which is superior, glue or press-on nails?

Press-on nails can last from a few days to a few weeks, depending on the glue. Peel-and-stick nails tend to stay a little bit longer than water-resistant adhesive nails. You can reattach the pins with more glue if they come loose.

Final Word

When building a frame, picking the proper framing nails is just as important as selecting suitable wood. There are a lot of things that make it hard to choose suitable materials for the job. Any builder will tell you that you can’t just go to the hardware store, pick out the cheapest wood they have, and start putting it together. The strength and stability of your structure determine the sort of wood you select and the fasteners you pick.

With very few exceptions, paper-collated nails look good on everyone. For example, a tool made for use with nails with a plastic head will work with a tool made for nails with a wire head, and conversely.

Read More: BOSTITCH RN46 Coil Roofing Nailer